Discover everything that you need to know about MVHR, from whether it's right for your home to how much these systems cost. 

 Enivorovent MVHR House

Image: Envirovent

Whether you’re self building or renovating, a sustainable source of home heating may be high on your agenda. If so, have you considered MVHR?

There are many important factors to consider when specifying MVHR, from installation to maintenance - read on to find answers to the most frequently asked questions surrounding these systems. 

What is MVHR?

Mechanical ventilation with heat recovery (MVHR) is an air-conditioning system that circulates warm, fresh, filtered air around the home. Filters in the main unit remove particles so that the circulating air is free from pollutants. Usually installed in a loft, basement or plant room, the air-handling unit is the hub of the system. It is connected to a series of ducts that are attached to extraction and supply points. Stale air is drawn out of each room at the extraction point, passed through a run of ducting to a heat exchanger and expelled outside. The extracted warmth is transferred via the heat exchanger to fresh air that flows through a separate run of ducting into the rooms.

diagram explaining how mvhr works - grand designs

Image: Total Home Environment

Is MVHR right for my project?

MVHR should be installed in a well-insulated, airtight home where warmth isn’t going to leak out via the building fabric. Installation is more straightforward in a self-build, where it can be designed into the plans from the start, but it is possible to incorporate the system into a renovation. Homes with open fireplaces are not suitable as the air bricks that supply air to the fire make the spaces too draughty.

‘When you walk into a home with well- functioning MVHR, you feel the freshness and warmth in the air,’ says Patrick Chester, project manager and Passivhaus consultant at Enhabit. ‘The airflow is constant but low, so the system is near- silent and ensures there’s no build-up of excess humidity, carbon dioxide or toxins from gas appliances.’ Filters also remove potentially harmful particles from the incoming air. ‘The filters remove pollution and airborne allergens, such as pollen, which can be beneficial for allergy sufferers,’ says Larry Soper, technical training manager at Envirovent.

Read more: Eco friendly ideas for home building in 2021

Which MVHR system is right for me?

There are several things to bear in mind when choosing MHVR. ‘The highest quality units are able to recover 96 per cent of the heat, while the poorest recover 70 per cent or less,’ explains Patrick.

Selecting a model that runs quietly is very important. This aspect of performance is measured in decibels (dBA), with lower numbers indicating a lower noise level. Most main units operate at about 40-45 dBA, similar to a fridge freezer, but this doesn’t matter so much as the unit is usually installed away from living spaces. Check the noise level of the air valves in each room too. They should be less than 25 dBA.

Take a close look at the controls and what they provide. ‘Are they easy to use? Is wireless functionality available? Are humidity and temperature monitored automatically?’ says Patrick. Check that there is a F7 pollen filter for the fresh-air intake, especially if anyone in your home suffers from asthma or allergies. Some units only have a G4 sponge filter, which keeps insects, hairs, large pollen spores and dust out. The F7 blocks smaller pollen spores, dust, bacteria and some smoke/oil fumes. If you want to zap everything, though, an electrostatic filter is even better.

The unit itself should be well insulated. ‘It’s no good having a model with a great heat exchanger if the recycled warmth gets lost through the unit’s skin,’ says Clarissa Youden, associate director at Total Home Environment. ‘Check that there is about 30mm thermal and acoustic insulation to the inside of the unit on the specification sheet.’

You should also consider an automatic summer bypass – in warmer months the heat from the outgoing air will not be recycled, but you’ll still get a fresh incoming flow. ‘With the UK’s erratic weather, having a modular bypass that automatically opens in specific increments when the temperature changes is a must,’ says Clarissa. ‘But manual ones can be inconvenient.’

6 Paul Archer Design new build with MVHR 1 CREDIT Nick Guttridge.Andy Stagg

Image: This modern new-build replaced a 1970s infill house. Designed to Passivhaus principles and highly insulated, it required an effective form of ventilation, so the architect Paul Archer specified an MVHR system from Service Vent. Photo: Nick Guttridge/Andy Stagg

How is MVHR installed?

Whatever kind of project you are undertaking, MVHR should be factored into the design at the start. ‘The ducting must be installed within the fabric of the building, so it needs to be considered as early as possible,’ says Lucy Holland, marketing executive at Airflow. ‘When the duct paths are already planned and prepared for, it saves time during installation.’ Long, straight runs of ducting provide a better channel for efficient airflow, so try and avoid bends where possible. MVHR can be installed once the house is wind- and watertight and the stud walls are up. Ideally, ducting should be fitted before first-fix plumbing and electrics.

2 Greeen Building Store MVHR unit at Golcar Passivhaus project

Image: For efficient air flow, this Paul Novus 300 MVHR, available from Green Building Store, features rigid steel ducting. 

‘The time it takes to install the system depends on the set-up,’ says Lucy. ‘For example, Airflex Pro semi-rigid radial ducting systems are up to 70 per cent quicker to install than a rigid branch set-up in a comparable four-bed house.’ Ducts are installed first, and any that run through unheated voids should be insulated. ‘The air-handling unit is installed at the finish, once the internal doors have been hung,’ says Lucy. ‘In line with regulations, internal doors must have a clear gap beneath to allow air to move around the house.’ MVHR should adhere to Parts F and L of Building Regulations, which cover ventilation and conservation of power. ‘You may also need to be mindful of Part E (resistance to sound), Part B (fire safety) and Part C (resistance to contaminants and moisture),’ explains Lucy.

3 Green Building Store Exposed MVHR ducting at Lansdowne Passivhaus

Image: The rigid, spiral-bound steel ducting has been left exposed in some areas of this Passivhaus. Project by Tectonics Architects.

How to maintain a MVHR system

The vents where air comes in or out, particularly the extract valves, are prone to collecting dust and should be wiped down regularly. You’ll need to clean the external grilles periodically too. A professional service is recommended every six years so the system can be deep-cleaned.

4 Green Building Store Heat exchanger from a Zehnder MVHR unit

Image: The heat exchanger from a Zehnder MVHR transfers warmth from the outgoing air into the incoming air, keeping it in the house and improving energy efficiency. Green Building Store or that the system is experiencing a high level of resistance,’ explains Larry.

How much does MVHR cost to install?

There are many variables that will affect the final cost of a system, from the size of your home to the type of ducts used. ‘A good-quality MVHR, including the ducting, insulation and the controller, costs anywhere between £2,500 and £7,000,’ says Clarissa. Installation is likely to cost upwards of £2,500, depending on the complexity of the project.

Before placing an order, check the guarantee your manufacturer is offering in case anything goes wrong with the system. Guarantees for the whole set-up will typically cover you for between two and seven years, depending on the supplier and whether you have opted into a maintenance scheme.

What are the operating costs of MVHR?

These can vary substantially depending on the size of the property and the number of rooms. ‘A well-installed system will recover more energy than it uses, with typical running costs of £40 to £80 per year,’ says Larry Soper. MVHR recovers as much as 80 per cent of the heat extracted from the house and will potentially reduce your annual heating costs as a result. Plus you won’t need to install separate extractor fans and hoods in your bathrooms and kitchen. Your home will still require a separate heating system, but MVHR will ensure it runs as efficiently as possible by recovering energy that would normally be lost via other means of ventilation.

Filters should be cleaned or changed every three months to a year, depending on local environmental conditions. A home near a busy road will need its filters cleaned more regularly than one in the countryside where there’s less pollution. ‘Always isolate the unit when changing the filters – the best systems have a dead man’s switch inside to automatically turn off the fans while they’re being serviced,’ says Lucy. ‘As well as a safety precaution, this prevents the unit from sucking dirty air through the heat exchanger while the filters are out and clogging it up.’

The heat exchanger from a Zehnder MVHR transfers warmth from the outgoing air into the incoming air, keeping it in the house and improving energy efficiency. Green Building Store or that the system is experiencing a high level of resistance,’ explains Larry. 

Tell-tale signs that your MVHR is not working properly include evidence of condensation and mould growth. If the system is noisy, that may also indicate an issue. ‘It’s possible that the filters may be blocked and require changing,

Some products such as Envirovent’s Energisava 200 and 250 units come with an app so that you can monitor the status of the unit, adjust the airflow rates and get notifications when the filters need changing.

Tell-tale signs that your MVHR is not working properly include evidence of condensation and mould growth. If the system is noisy, that may also indicate an issue. ‘It’s possible that the filters may be blocked and require changing,

Some products such as Envirovent’s Energisava 200 and 250 units come with an app so that you can monitor the status of the unit, adjust the airflow rates and get notifications when the filters need changing.

9 RISE Design Studio MVHR renovation Rise douglas CREDIT Edmund Sumner

Image: As part of the renovation and extension of this house in north London, the thermal envelope was upgraded to establish a well-insulated, airtight shell. Project by Rise Design StudioPhoto: Edmund Sumner

How do I retrofit MVHR?

Installation tips from Tom Heywood, MVHR design manager at Green Building Store:

  • Sometimes finding space for ducting runs in retrofits can be a challenge, but it’s usually possible to find a way. Where space is at a premium ducting may need to be hidden away in bulkheads or false ceiling voids if there are no other options. Alternatively, you might like the look of visible steel ductwork.
  • Where possible, we always prefer to use rigid, spiral-wound steel ducting, which offers a more robust, airtight and durable specification. Occasionally in tight, tricky retrofit projects, we use semi-rigid systems, which offer a bit more flexibility and are easier to fit in.
  • The ideal location for an MVHR unit would be in a utility/plant room on the north side of the building close to an external wall. But sometimes, especially for retrofit projects, the only space available to locate the unit is in the loft. I’m not a big fan of this solution, but if there are no other options, create a decent access route to the unit such as a hatch with a ladder and walkway or floorboards for when filter changes are required.
  • Consider where the intake and exhaust grilles will be positioned. A gable wall, if possible, will be cheaper, easier and more efficient than having to go through the roof using roof terminals.
  • If the unit is in a cold loft, think about insulating the ductwork. This element of the system must be installed below the insulation level and within the thermal envelope to prevent condensation problems.
  • For smaller homes, MVHR units can be quite compact. Where space is limited, the unit can be mounted on the ceiling.

 

For more project inspiration, read Grand Designs magazine digitally for free now by registering your details

read a free issue of grand designs magazine

MORE ARTICLES

A guide to air source heat pumps

How the structure of your self build will dictate the way you heat it

Buying guide to underfloor heating

Kevins Column

Top self build highlights at Grand Designs Live 2019 hosted by Kevin McCloud

Find top experts, specialist exhibitors and a wealth of inspiration for your self-build or renovation project all under one roof.
visit-award-winning-grand-designs-live-hosted-by-kevin-mccloud
design-impact-contemporary-stairs-balconies
Home Improvements

Make a design impact with contemporary stairs and balconies

Bespoke contemporary staircases, gates and balconies can have a transformative effect on a self-build home
futureproof-your-home-with-stylish-lifts
Home Improvements

Future-proof your home with a luxury home lift

Lifts can be a real feature in your dream home. Not only that, they future proof it too, ensuring it will be accessible for you...
what-you-need-to-know-about-triple-glazed-windows
Home Improvements

Triple glazed windows: what you need to know

Triple glazing is increasingly popular with self-builders. We present a handy guide to the ins and outs of triple glazed windows.
get-a-healthy-house-when-you-install-a-ventilation-system
Home Improvements

Get a healthy house when you install a ventilation system

Boosting the air quality in your home can have a transformative effect on health and happiness. We look at why adequate home ventilation really matters.
discover-a-wine-room-design-service-for-self-builders
Home Improvements

Discover a wine room design service for self builders

Luxury wine storage can be the perfect addition to your statement home. Discover spiral cellars and bespoke walk-in wine rooms.